Temporary chain link fence panels provide portable, freestanding perimeter security for construction sites, events, crowd control, and hazard containment, without the need for post-setting or concrete footings. Panels are available in two standard sizes: 6' H x 10' W and 6' x 12' W.

How It Works

Panels are galvanized steel chain link welded to a steel frame, in either 6' H x 10' W or 6' H x 12' W. Each panel stands in a weighted or slip-on base, and panels connect end-to-end with clamps for continuous fence runs. The two sizes use different base styles, so order the base that matches your panel. Setup requires no tools or post-driving, a two-person crew can install a standard construction site perimeter in under an hour.

Common Applications

Construction sites: OSHA requires perimeter fencing for construction areas in proximity to pedestrians. Temporary chain link meets this requirement and can be repositioned as the site footprint changes.

Special events: Concerts, festivals, and sporting events use temporary chain link for crowd flow control, backstage perimeters, and VIP area separation. Panels can be topped with privacy screen for visual blocking.

Hazard containment: Utility work, street repairs, and excavations use temporary chain link to keep pedestrians and vehicles away from open trenches, equipment, and overhead hazards.

What to Order

Measure your total perimeter length, then divide by your panel width: 10 for 6x10 panels, 12 for 6x12 panels. Add 10% for gates, corners, and overlap. A 300 ft perimeter needs 33 panels at 6x10, or 28 panels at 6x12.

Crowd Control Warehouse sells panels, bases, and clamps individually and as complete perimeter kits. All components are compatible with standard 6’ temporary chain link systems.

FAQs

1. What is temporary chain link fence?

Temporary chain link fence consists of freestanding, portable panels, 6’ tall by either 10’ or 12' wide, made from galvanized steel chain link in a steel frame. Panels stand in weighted bases and connect together with clamps to form continuous fence runs. No post-digging or concrete is required.

2. How do you install temporary chain link fence panels?

Place the bases matched to your panel size at regular intervals, slide each panel into the base sockets, and connect adjacent panels with panel clamps. Most installations are completed without tools. A two-person crew can install 200-300 linear feet per hour. For high-wind areas, use sandbag ballast on panel bases.

3. Does a temporary chain link fence meet OSHA requirements?

A temporary chain link fence meets OSHA construction site safety standards when installed to a minimum height of 6 feet adjacent to pedestrian traffic. Both the 10 ft and 12 ft wide panels stand 6 feet tall. These portable panels provide the perimeter security commercial sites need and can be repositioned as work zones evolve. Always verify compliance with your site safety officer and local municipal ordinances, as specific height and material standards may vary by jurisdiction.

4. Should I use 10 ft or 12 ft wide panels?

Use 12 ft panels on long straight runs. They cover 20% more ground per panel, so a 300 ft perimeter takes 25 panels instead of 30, with fewer connection points to set. Use 10 ft panels where the perimeter has frequent corners, gates, or tight access, since shorter panels are lighter and easier to reposition. Both sizes are 6 feet tall and can be mixed in the same fence line. 

5. How much does temporary chain link fence cost?

Panel pricing depends on gauge, coating, and quantity. At Crowd Control Warehouse, temporary chain link fence panels are available individually and in bulk packs with quantity discounts. Request a bulk pricing quote for orders of 10+ panels. Complete perimeter kits including bases and clamps are also available.

6. Can temporary chain link fence panels be used for events?

Yes. temporary chain link is widely used at concerts, festivals, marathons, fairs, and sporting events for crowd control, perimeter fencing, and backstage separation. Privacy screen fabric attaches to panels with zip ties for visual blocking and wind reduction.

7. What’s the difference between temporary chain link fence and permanent chain link?

Temporary chain link panels are freestanding and designed to be moved and reused, with no post installation required. Permanent chain link fence is post-driven or concrete-set and intended to remain in place. Temporary panels use a lighter mesh gauge than permanent fence and prioritize portability over long-term security.