FlexStake 750 Series Surface Mount Traffic Delineator - Blue Tubular Post with Reflective Options

The FlexStake 750 Series Traffic Delineator is the perfect surface-mounted solution for traffic management, providing unmatched durability and visibility. With various height post and reflective sheeting options, this tubular post ensures adaptability for various applications. The round base ensures stable installation, while its impact-resistant design delivers reliable performance in challenging environments.

Includes:
FlexStake 750 Series Surface Mount Center Line Round Base Traffic Delineator - Blue Tubular Post with Reflective Options

Features:

• SIX POST HEIGHT OPTIONS: Available in six height options to suit different needs: 19", 24", 30", 36", 42", and 48".
• DURABLE CONSTRUCTION: Impact-resistant blue tubular post designed for long-lasting use in high-traffic areas.
• VERSATILE SHEETING OPTIONS: Choose between no sheeting or reflective sheeting in single or double strips, with color options including orange, red, white, and yellow for enhanced visibility.
• STABLE SURFACE MOUNTING: Features a centerline round base for secure and straightforward installation.
• SUITABLE FOR ALL ENVIRONMENTS: Designed for effective performance in roadways, parking lots, and construction zones.

Bolted Base Installation Instructions:

Recommended Hardware:
Use 1/4" to 3/4" Red Head anchors, wedge anchors, or Tapcon screws.

Installation Steps:

1. Position the Base:
   Place the Flexstake base in the desired location and mark the hole pattern on the surface.
2. Drill Holes:
   Using a suitable masonry bit, drill four holes in the asphalt or concrete according to the marked pattern.
3. Clean Holes:
   Remove all dust and debris from the holes using compressed air to ensure proper adhesion.
4. Prepare the Base:
   Insert the selected anchors or screws into the holes in the Flexstake base.
5. Apply Epoxy:
   Fill the drilled holes with a construction-grade epoxy suitable for concrete or asphalt surfaces.
6. Install the Base:
   Slowly press the Flexstake base, with the anchors inserted, into the epoxy-filled holes until fully seated.
7. Allow to Cure:
   Let the epoxy cure according to the manufacturer’s instructions before applying any load or impact to the stake.