The FlexStake 750 Series Surface Mount Traffic Delineator is the ideal solution for guiding traffic and enhancing safety in high-traffic areas. This durable, orange tubular post is highly visible and designed to flex upon impact, ensuring long-term performance even in demanding environments. Equipped with reflective sheeting options, it provides maximum visibility in low-light or nighttime conditions. Perfect for construction zones, parking lots, and roadway applications, this delineator is built to last while maintaining safety and efficiency.
Includes:
FlexStake 750 Series Surface Mount Traffic Delineator - Orange Tubular Post with Reflective Sheeting Options
Features:
- MULTIPLE HEIGHT OPTIONS: Available in 19", 24", 30", 36", 42", and 48" heights to suit your specific traffic management needs.
- DURABLE CONSTRUCTION: Made from high-impact materials that withstand extreme weather and repeated impacts.
- HIGH VISIBILITY: Bright orange post with customizable reflective sheeting options to ensure visibility day and night.
- ROUND BASE DESIGN: Surface mount with a center-line round base for stable and secure installation in high-traffic areas.
- MULTIPLE APPLICATIONS: Ideal for traffic control, lane separation, parking lots, and construction zones.
Bolted Base Installation Instructions:
Recommended Hardware:
Use 1/4" to 3/4" Red Head anchors, wedge anchors, or Tapcon screws.
Installation Steps:
-
Position the Base:
Place the Flexstake base in the desired location and mark the hole pattern on the surface.
-
Drill Holes:
Using a suitable masonry bit, drill four holes in the asphalt or concrete according to the marked pattern.
-
Clean Holes:
Remove all dust and debris from the holes using compressed air to ensure proper adhesion.
-
Prepare the Base:
Insert the selected anchors or screws into the holes in the Flexstake base.
-
Apply Epoxy:
Fill the drilled holes with a construction-grade epoxy suitable for concrete or asphalt surfaces.
-
Install the Base:
Slowly press the Flexstake base, with the anchors inserted, into the epoxy-filled holes until fully seated.
-
Allow to Cure:
Let the epoxy cure according to the manufacturer’s instructions before applying any load or impact to the stake.
