FlexStake 750 Series Surface Mount Traffic Delineator - Red Tubular Post with Reflective Sheeting Options

The FlexStake 750 Series Red Traffic Delineator combines high visibility and impact resistance for effective traffic control and safety applications. With customizable reflective sheeting options and multiple height choices, this delineator is ideal for roadways, parking lots, and construction zones. The durable, surface-mounted design ensures long-lasting performance and ease of installation on asphalt or concrete surfaces.

Includes:
FlexStake 750 Series Surface Mount Traffic Delineator - Red Tubular Post with Reflective Sheeting Options

Features:

• DURABLE CONSTRUCTION: Made from impact-resistant red tubular material to withstand harsh traffic conditions.
• HEIGHT OPTIONS: Available in six heights: 19", 24", 30", 36", 42", and 48", to suit diverse applications
• REFLECTIVE SHEETING CUSTOMIZATION: Choose from no sheeting, or 1 or 2 reflective strips in Orange, Red, White, or Yellow for enhanced visibility in low-light conditions.
• ROUND BASE DESIGN: Surface mount with a center-line round base for stable and secure installation in high-traffic areas.
• APPLICATION VERSATILITY: Perfect for use in traffic management, construction sites, and parking lot safety.

Bolted Base Installation Instructions:

Recommended Hardware:
Use 1/4" to 3/4" Red Head anchors, wedge anchors, or Tapcon screws.

Installation Steps:

1. Position the Base:
   Place the Flexstake base in the desired location and mark the hole pattern on the surface.
2. Drill Holes:
   Using a suitable masonry bit, drill four holes in the asphalt or concrete according to the marked pattern.
3. Clean Holes:
   Remove all dust and debris from the holes using compressed air to ensure proper adhesion.
4. Prepare the Base:
   Insert the selected anchors or screws into the holes in the Flexstake base.
5. Apply Epoxy:
   Fill the drilled holes with a construction-grade epoxy suitable for concrete or asphalt surfaces.
6. Install the Base:
   Slowly press the Flexstake base, with the anchors inserted, into the epoxy-filled holes until fully seated.
7. Allow to Cure:
   Let the epoxy cure according to the manufacturer’s instructions before applying any load or impact to the stake.