FlexStake 750 Series Surface Mount Traffic Delineator - Yellow Tubular Post with Reflective Sheeting Options

The Flexstake 750 Series Surface Mount Round Base Traffic Delineator Post is a durable and highly visible solution for traffic control and lane delineation. With its yellow post and multiple reflective sheeting options, this delineator is ideal for parking lots, roadways, and construction zones.

Includes:
FlexStake 750 Series Surface Mount Traffic Delineator - Yellow Tubular Post with Reflective Sheeting Options

Features:

• MULTIPLE HEIGHT OPTIONS: Available in 19", 24", 30", 36", 42", and 48" heights to suit your specific traffic management needs.
• DURABLE YELLOW POST: Constructed to withstand impact and harsh outdoor conditions, ensuring long-lasting performance.
• REFLECTIVE SHEETING OPTIONS: Choose from no sheeting or one or two strip reflective sheeting in orange, red, white, or yellow for enhanced visibility.
• ROUND BASE DESIGN: Surface mount with a center-line round base for stable and secure installation in high-traffic areas.
• VERSATILE APPLICATIONS: Perfect for marking center lines, lanes, or areas requiring high visibility and flexible delineation.

Bolted Base Installation Instructions: 

Recommended Hardware:
Use 1/4" to 3/4" Red Head anchors, wedge anchors, or Tapcon screws.

Installation Steps:

1. Position the Base:
   Place the Flexstake base in the desired location and mark the hole pattern on the surface.
2. Drill Holes:
   Using a suitable masonry bit, drill four holes in the asphalt or concrete according to the marked pattern.
3. Clean Holes:
   Remove all dust and debris from the holes using compressed air to ensure proper adhesion.
4. Prepare the Base:
   Insert the selected anchors or screws into the holes in the Flexstake base.
5. Apply Epoxy:
   Fill the drilled holes with a construction-grade epoxy suitable for concrete or asphalt surfaces.
6. Install the Base:
   Slowly press the Flexstake base, with the anchors inserted, into the epoxy-filled holes until fully seated.
7. Allow to Cure:
   Let the epoxy cure according to the manufacturer’s instructions before applying any load or impact to the stake.